DetailsCarPro Metallicut was formulated to create a high gloss finish on all metals.
No expense is spared in the design of metallicut with diamond abrasive powders, and diminishing abrasive compounds providing a fast cutting action with a high gloss finish safe on even the softest of metals – chrome!
Fast and effective Metallicut is the go to metal polish for detailers for exhaust tips, chrome wheels, bumpers and trims. Create a better than new shine with Metallicut and a foam polishing pad by machine!
Effective on all types of metals including Stainless steel, aluminium, and chrome.
Fast effective cutting action
Can be used by hand or machine
High gloss finish
Safe on soft metals
Easy to use
- Directions for use
For use by hand.
Apply a small amount of Metallicut to a microfiber towel or wire wool depending on the metal type.
Using medium to firm pressure work Metallicut into the metal surface until the product becomes less opaque.
Use a clean microfiber towel to buff away any additional residue to a high shine.
Repeat steps 1-3 as necessary.
For use by machine.
Apply 6-8 drops of Metallicut to a firm foam polishing pad.
Spread Metallicut on the surface at speed 1-2
Increase to speed 4-5 to perform the cutting action until the abrasives are broken down and a high gloss is achieved.
Using a clean microfiber towel remove buff any excess residue and repeat steps 1-3 as necessary.
For use by drill attachment foam cone or buffing wheel
Apply a liberal amount of Metallicut to the chosen tool.
Spread Metallicut at low speed.
Increase the speed of the drill and use a medium to high speed until the abrasives are broken down.
Use a clean microfiber to buff off any excess residue and repeat steps 1-3 as necessary.